You are deploying a small network that has 30 client computers. The network uses the 192.168.1.0/24 address
space. All computers obtain IP configurations from a DHCP server named Server1.
You install a server named Server2 that runs Windows Server 2016. Server2 has two network adapters named
internal and Internet. Internet connects to an Internet service provider (ISP) and obtains the 131.107.0.10 IP
address. Internal connects to the internal network and is configured to use the 192.168.1.250 IP address.
You need to provide Internet connectivity for the client computers.
What should you do?
A.
On Server2, select the Internet and Internal network adapters and bridge the connections. From the DHCP
console on Server1, authorize Server2.
B.
On Server1, stop the DHCP server. On the Internal network adapter on Server 2, enable Internet
Connection Sharing (ICS).
C.
On Server2 run the New-NetNat -Name NAT1 -InternalIPInterfaceAddressPrefix 1 92.168.1.0/24 cmdlet.
Configure Server1 to provide the 003 Router option of 1 31.107.0.10.
D.
Install the Routing role service on Server2 and configure the NAT routing protocol. Configure Server1 to
provide the 003 Router option of 192.168.1.250.
Explanation:
References: https://en.wikipedia.org/wiki/Internet_Connection_Sharing