What information does the help topic command provide?
What information does the help topic command provide?
Which of the following commands will configure the maxi…
Which of the following commands will configure the maximum transmission unit size of a fast Ethernet
interface?
which two syslog files will be present in the configuration?
After factory-defaults have been loaded, which two syslog files will be present in the configuration?
Which two are correct when configuring an IP address fo…
Which two are correct when configuring an IP address for a Fast Ethernet interface? (Choose two.)
What are the usable hosts on the 192.168.1.24/29 network?
What are the usable hosts on the 192.168.1.24/29 network?
what will be the next-hop IP address used for a destina…
— Exhibit —
user@router> show route protocol static
inet.0: 12 destinations, 12 routes (12 active, 0 holddown, 0 hidden)
+ = Active Route, – = Last Active, * = Both
192.168.1.0/24 *[Static/5] 00:03:13
>to 10.20.106.10 via fe-0/0/5.1
192.168.1.192/26 *[Static/5] 00:03:13
>to 10.20.14.131 via ge-0/0/0.0
192.168.1.192/27 *[Static/5] 00:03:13
>to 10.18.1.1 via ge-0/0/1.0
192.168.1.4/30 *[Static/5] 00:01:06
>to 10.20.14.130 via ge-0/0/0.0
— Exhibit —
Using the routing table shown in the exhibit, what will be the next-hop IP address used for a destination IP
address of 192.168.1.1? (Assume that the only routes to this destination are static routes.)
which next-hop IP address will be used for the destinat…
— Exhibit —
user@router> show route protocol static
inet.0: 12 destinations, 12 routes (12 active, 0 holddown, 0 hidden)
+ = Active Route, – = Last Active, * = Both
192.168.1.128/27 *[Static/5] 00:03:13
>to 10.20.106.10 via fe-0/0/5.1
192.168.1.144/29 *[Static/5] 00:03:13
>to 10.20.14.131 via ge-0/0/0.0
192.168.1.192/27 *[Static/5] 00:03:13>to 10.18.1.1 via ge-0/0/1.0
192.168.1.128/28 *[Static/5] 00:01:06
>to 10.20.14.130 via ge-0/0/0.0
— Exhibit —
Given the routing entries shown in the exhibit, which next-hop IP address will be used for the destination IP
address 192.168.1.159? (Assume that only static routes are available for the destination.)
which next-hop IP address will be used for the destinat…
— Exhibit —
user@router> show route protocol static
inet.0: 12 destinations, 12 routes (12 active, 0 holddown, 0 hidden)
+ = Active Route, – = Last Active, * = Both
192.168.1.128/27 *[Static/5] 00:03:13
>to 10.20.106.10 via fe-0/0/5.1
192.168.1.144/29 *[Static/5] 00:03:13
>to 10.20.14.131 via ge-0/0/0.0
192.168.1.192/27 *[Static/5] 00:03:13
>to 10.18.1.1 via ge-0/0/1.0
192.168.1.128/28 *[Static/5] 00:01:06
>to 10.20.14.130 via ge-0/0/0.0
— Exhibit —
Given the routing entries shown in the exhibit, which next-hop IP address will be used for the destination IP
address 192.168.1.142? (Assume that only static routes are available for the destination.)
which type of classifier is being used in this CoS conf…
— Exhibit —
[edit class-of-service]
user@router# show
interfaces {
ge-0/0/2 {
unit 0 {
classifiers {
inet-precedence default;
}
}
}
}
— Exhibit —
Referring to the exhibit, which type of classifier is being used in this CoS configuration?
which type of classifier is being used in this CoS conf…
— Exhibit —
[edit firewall family inet filter COS-CLASSIFIER]
user@router# show
term MANAGER {
from {
source-address {
192.168.200.0/25;
}
destination-address {
100.100.100.1/32;
}}
then {
forwarding-class expedited-forwarding;
accept;
}
}
term ALL-OTHER-TRAFFIC {
then accept;
}
[edit interfaces ge-0/0/1]
user@router# show
unit 0 {
familyinet {
filter {
input COS-CLASSIFIER;
}
address 192.168.200.1/24;
}
}
— Exhibit —
Referring to the exhibit, which type of classifier is being used in this CoS configuration?