A company’s security policy does not allow outside computers or smart phones into their
work areas. All company-provided computers are strictly controlled using 802.1X
authentication on all of their switches. All computers obtain DHCP IP addresses from
centralized servers and all switches have IP spoofing enabled. However, one of the
computers was able to send IP spoofed packets. Why did the IP spoof feature fail to prevent
the spoofed packets from being forwarded?

What is a valid router ID configuration for OSPFv3 in the Junos OS?

You are setting up a new switch in your network that is using MSTP. You have configured
all access ports as edge ports, and you want to make sure that the access ports can never
transition to nonedge ports. How can you meet this requirement?

When using PIM-SM in ASM mode, which two events trigger the creation of a shortest-path
tree? (Choose two.)

A coffee shop offering free Internet service to customers wants to implement the following
security policies: 1. Every customer must agree to a set of terms and conditions before
accessing the Internet. 2. Log out customers that are logged in for more than one hour. 3.
Log out customers that are idle for more than 5 minutes. 4. Authenticate employee desktop

computers with known hardware addresses in the office of the coffee shop to access the
Internet without the above restrictions. The following configuration has been applied to the
switch: set access radius-server 172.16.14.26 port 1812 set access radius-server
172.16.14.26 secret Am@zingC00f33 set access profile dot1x authentication-order radius
set access profile dot1x radius authentication-server 172.27.14.226 What would you add to
implement these policies?

What is an IP multicast routing protocol?

Which version of BGP would an enterprise use to peer with an ISP?

You are setting up a new switch in your network that is using MSTP. You want to make sure
that any port connected to a host starts forwarding traffic immediately. How can you meet
this requirement?

You have been asked to implement 802.1X in your network and to ensure that all authorized
users continue to be permitted should the RADIUS server fail. Which solution will satisfy this
requirement?

How does an administrator block IGMP reports for the 239.0.0.0/8 group range?