An LTM Specialist must perform a packet capture on a virtual server with an applied standard FastL4
profile. The virtual server 10.0.0.1:443 resides on vlan301.
Which steps should the LTM Specialist take to capture the data payload successfully while ensuring no
other virtual servers are affected?
A.
The standard FastL4 profile should have PVA acceleration disabled. Then the packet capture tcpdump –
ni vlan301 should be executed on the command line interface.
B.
The packet capture tcpdump -ni vlan301 should be executed on the command line interface.
There is no need to change profiles or PVA acceleration.
C.
A new FastL4 profile should be created and applied to the virtual server with PVA acceleration disabled.
Then the packet capture tcpdump -ni vlan301 should be executed on the command line interface.
D.
The LTM device is under light load. The traffic should be mirrored to a dedicated sniffing device. On the
sniffing device, the packet capture tcpdump -ni vlan301 should be executed.