An LTM Specialist must perform a hot fix installation from the command line.
What is the correct procedure to ensure that the installation is successful?

In which file would the LTM Specialist find virtual server configurations?

What is the correct command to reset an LTM device to its default settings?

A stand-alone LTM device is to be paired with a second LTM device to create an active/standby pair. The
current stand-alone LTM device is in production and has several VLANs with floating IP addresses
configured. The appropriate device service clustering (DSC) configurations are in place on both LTM
devices.
Which two non-specific DSC settings should the LTM Specialist configure on the second LTM device to
ensure no errors are reported when attempting to synchronize for the first time? (Choose two.)

An LTM device is running BIG-IP v10.2.0 software. The LTM Specialist is tasked with upgrading the LTM
device to BIG-IP v11.2.0 HF1. The LTM Specialist starts the upgrade process by selecting the uploaded
Hotfix and installing to an unused volume. After 10 minutes, the LTM Specialist checks the status of the
upgrade process and notices that the process is stalled at 0%.
What should the LTM Specialist verify?

The pool members are serving up simple static web content.
The current virtual server configuration is given as follows:
tmsh list ltm virtual simple
ltm virtual simple {
destination 10.10.10.10:80
ip-protocol tcp
mask 255.255.255.255
profiles {
http { }
httpcompression { }
oneconnect { }
tcp { }
}
snat automap
vlans-disabled
}
tmsh list ltm pool simple_pool
ltm pool simple_pool {
members {
10.10.10.11:80 {
address 10.10.10.11 }
10.10.10.12:80 {
address 10.10.10.12 }
10.10.10.12:80 {
address 10.10.10.13 }
}
}
Which three objects in the virtual server configuration can be removed without disrupting functionality of the
virtual server? (Choose three.)

An LTM Specialist is working with an LTM device configured with 10 virtual servers on the same domain
with a different key/cert pair per virtual. For examplE. www.example.com; ftp.example.com;
ssh.example.com; ftps.example.com.
What should the LTM Specialist do to reduce the number of objects on the LTM device?

Users are experiencing low throughput when downloading large files over a high-speed WAN connection.
Extensive packet loss was found to be an issue but CANNOT be eliminated.
Which two TCP profile settings should be modified to compensate for the packet loss in the network?
(Choose two.)

Windows PC clients are connecting to a virtual server over a high-speed, low-latency network with no
packet loss.

Which built-in client-side TCP profile provides the highest throughput for HTTP downloads?

Internet clients connecting to a virtual server to download a file are experiencing about 150 ms of latency
and no packet loss.Which built-in client-side TCP profile provides the highest throughput?