Which command collects the data needed to analyze a Cisco switch?
Which command collects the data needed to analyze a Cisco switch?
Which syntax switch is replaced by -address in Navisphere Secure CLI?
Which syntax switch is replaced by -address in Navisphere Secure CLI?
Which tab displays specific error counts in CAP2?
Which tab displays specific error counts in CAP2?
How many fans within the three hot swop-able fan packs are required to allow a CX700 SPE to remain powered up?
How many fans within the three hot swop-able fan packs are required to allow a CX700 SPE to
remain powered up?
Which command will start Background Verify and restart the pass counter for LUN 0?
Which command will start Background Verify and restart the pass counter for LUN 0?
What is the maximum number of initiators per sp port on a CX700 CLARiiON Array?
What is the maximum number of initiators per sp port on a CX700 CLARiiON Array?
What is the minimum number of Hot Spares you should have?
A CLARiiON Array has 15 FC 36GB drives, 15 FC 73GB drives, 15 ATA 320GB drives and 15
ATA 250 GB. What is the minimum number of Hot Spares you should have?
Which interface is recommended?
You are using the host-based FBI to monitor a CX-Series Array. Which interface is
recommended?
Why did the command fail?
You issue the following command: naviseccli -h ss1_spa createrg 3 0_0_9 The command fails.
Why did the command fail?
Which two CLARiiON CX-series models apply?
You are sent a DPE with 15 drives for an install Which two CLARiiON CX-series models apply?