CORRECT TEXT
SIMULATION
You have been tasked with setting up a wireless network in an office. The network will consist of 3 access
points and a single switch. The network must meet the following parameters.
The SSIDs need to be configured as corpnet with a key of S3cr3t!
The wireless signals should not interfere with each other
The subnet the Access points and Switch are on should only support 30 devices maximum
The access Points should be configured to only support TKIP clients at a maximum speed
Instructions: Click on the devices to review their information and adjust the setting of the APs to meet the given
requirements.

CORRECT TEXT
SIMULATION
After recent changes to the pictured network, several users are unable to access the servers. Only PC1, PC2,
PC3, and PC4 are configurable. You can only change the adapter configurations to each PC.

DRAG DROP
Your company recently purchased a new building down the street from the existing office.
For each of the tasks below, select the appropriate antenna type and encryption object for all wireless access
point (AP).
1. Create an encrypted wireless connection between the two buildings that BEST controls signal propagation,
while maximizing security.
2. Restrict the wireless signal generated by the access points (AP’s) inside Building 1, so that it minimizes
broadcast beyond the building.
3. Maximize wireless coverage inside Building 1.
4. Building 1’s internal wireless network is for visitors only and must not require any special configuration on the
visitor’s device to connect.
Select and Place:

DRAG DROP
Wireless network users recently began experiencing speed and performance issues after access point 2 (AP2)
was replaced due to faulty hardware. The original network was installed according to a consultant’s
specifications and has always worked without a problem.
You a network technician, have been tasked with evaluating the situation and resolving the issues to improve
both performance and connectivity. Refer to the following exhibits and perform any necessary changes to thewireless and wired infrastructure by adjusting devices. Note: Adjust the LEAST number of devices needed to fix
the issue.
Select and Place:

DRAG DROP
A customer’s email server is not sending emails. Arrange the troubleshooting steps in the order the technician
should perform them:
Select and Place:

DRAG DROP
Drag and drop the fiber cable connection types to the appropriate image.
Select and Place:

A network technician is utilizing a network protocol analyzer to troubleshoot issues that a user has been
experiencing when uploading work to the internal FTP server. Which of the following default port numbers
should the technician set the analyzer to highlight when creating a report? (Select TWO).

Which of the following PDUs is used by a connectionless protocol?

A technician has prolonged contact with a thermal compound. Which of the following resources should be
consulted?

A network technician has been tasked with designing a WLAN for a small office. One of the requirements of
this design is that it is capable of supporting HD video streaming to multiple devices. Which of the following
would be the appropriate wireless technology for this design?