CORRECT TEXT
SIMULATION
You have been tasked with testing a CAT5e cable. A summary of the test results can be found on the screen.
Step 1: Select the tool that was used to create the cable test results.
Step 2: Interpret the test results and select the option that explains the results. After you are done with your analysis, click the ‘Submit Cable Test Analysis’ button.

A network engineer needs to set up a topology that will not fail if there is an outage on a single piece of the topology. However, the computers need to wait to talk on
the network to avoid congestions. Which of the following topologies would the engineer implement?

A network technician must utilize multimode fiber to uplink a new networking device. Which of the following Ethernet standards could the technician utilize? (Select
TWO).

An F-connector is used on which of the following types of cabling?

Which of the following connection types is used to terminate DS3 connections in a telecommunications facility?

An administrator notices an unused cable behind a cabinet that is terminated with a DB-9 connector. Which of the following protocols was MOST likely used on this
cable?

Which of the following is MOST likely to use an RJ-11 connector to connect a computer to an ISP using a POTS line?

Which of the following protocols uses label-switching routers and label-edge routers to forward traffic?

When configuring a new server, a technician requests that an MX record be created in DNS for the new server, but the record was not entered properly. Which of
the following was MOST likely installed that required an MX record to function properly?

A technician just completed a new external website and setup access rules in the firewall. After some testing, only users outside the internal network can reach the
site. The website responds to a ping from the internal network and resolves the proper public address. Which of the following could the technician do to fix this issue
while causing internal users to route to the website using an internal address?