A technician has prolonged contact with a thermal compound. Which of the following resources
should be consulted?

Wireless network users recently began experiencing speed and performance issues after access
point 2 (AP2) was replaced due to faulty hardware. The original network was installed according to a
consultant’s specifications and has always worked without a problem.
You, a network technician, have been tasked with evaluating the situation and resolving the issues to
improve both performance and connectivity. Refer to the following diagram and perform any
NECESSARY changes to the wireless and wired infrastructure by adjusting devices.
Note: Adjust the LEAST number of devices needed to fix the issue, all blue icons in the image are
clickable. When you feel the simulation is complete please select the Done button.

You have been tasked with testing a CAT5e cable. A summary of the test results can be found on the
screen.
Step 1: Select the tool that was used to create the cable test results.
Step 2: Interpret the test results and select the option that explains the results. After you are done
with your analysis, click the ‘Submit Cable Test Analysis’ button.

Alter recent changes to the pictured network, several users are unable to access the servers. Only
PC1, PC2, PC3, and PC4 are clickable and will give you access to the command prompt and the
adapter configuration tabs.
Instructions: Verify the settings by using the command prompt, after making any system changes.
Next, restore connectivity by making the appropriate changes to the infrastructure. When you have
completed these steps, select the Done button to submit.

Corporate headquarters provided your office a portion of their class B subnet to use at a new office
location. Allocate the minimum number of addresses (using CIDR notation) needed to accommodate
each department.

Alter accommodating each department, identify the unused portion of the subnet by responding to
the question on the graphic. All drop downs must be filled.
Instructions: When the simulation is complete, please select the Done button to submit.

All Networks have the range form /0 to/32