Which set of statements about Spanning Tree Protocol default timers is true?

A.
The hello time is 2 seconds.
The forward delay is 10 seconds.
The max_age timer is 15 seconds.

B.
The hello time is 2 seconds.
The forward delay is 15 seconds.
The max_age timer is 20 seconds.

C.
The hello time is 2 seconds.
The forward delay is 20 seconds.
The max_age timer is 30 seconds.

D.
The hello time is 5 seconds.
The forward delay is 10 seconds.
The max_age timer is 15 seconds.

E.
The hello time is 5 seconds.
The forward delay is 15 seconds.
The max_age timer is 20 seconds.

Explanation:

The STP timers are:
1. hello-The hello time is the time between each bridge protocol data unit (BPDU) that is sent on a port. This time is equal to 2 seconds (sec) by default, but you can tune the time to be between 1 and 10 sec.
2. forward delay-The forward delay is the time that is spent in the listening and learning state. This time is equal to 15 sec by default, but you can tune the time to be between 4 and 30 sec.
3. max age-The max age timer controls the maximum length of time that passes before a bridge port saves its configuration BPDU information. This time is 20 sec by default, but you can tune the time to be between 6 and 40 sec. Reference: http://www.cisco.com/warp/public/473/122.html#stp_timers