Which option shows the correct traffic selectors for the child SA on the remote ASA, when the
headquarter ASA initiates the tunnel?
A.
Local selector 192.168.33.0/0-192.168.33.255/65535 Remote selector 192.168.20.0/0-
192.168.20.255/65535
B.
Local selector 192.168.33.0/0-192.168.33.255/65535 Remote selector 192.168.22.0/0-
192.168.22.255/65535
C.
Local selector 192.168.22.0/0-192.168.22.255/65535 Remote selector 192.168.33.0/0-
192.168.33.255/65535
D.
Local selector 192.168.33.0/0-192.168.33.255/65535 Remote selector 0.0.0.0/0 –
0.0.0.0/65535
E.
Local selector 0.0.0.0/0 – 0.0.0.0/65535 Remote selector 192.168.22.0/0 –
192.168.22.255/65535
Explanation:
The traffic selector is used to determine which traffic should be protected (encrypted over the
IPSec tunnel). We want this to be specific, otherwise Internet traffic will also be sent over the
tunnel and most likely dropped on the remote side. Here, we just want to protect traffic from
192.168.33.0/24 (THE LOCAL SIDE) to 192.168.22.0/24 (THE REMOTE SIDE).