You want to configure Port A on a Cisco TelePresence MCU 5300 with IP address 192.168.1.43, subnet mask
255.255.255.0, and default gateway 192.168.1.1.
Which of the following commands or command sets should you issue?
A.
static A 192.168.1.43 255.255.255.0 192.168.1.1
B.
ip address 192.168.1.43 255.255.255.0 192.168.1.1
C.
set network ip static 192.168.1.43 255.255.255.0 192.168.1.1
D.
xConfiguration Network 1 IPv4 Address: “192.168.1.43”
xConfiguration Network 1 IPv4 SubnetMask: “255.255.255.0”
xConfiguration Network 1 IPv4 Gateway: “192.168.1.1”
E.
interface A
ip address 192.168.1.43 255.255.255.0
ip defaultgateway 192.168.1.1
Explanation:
You should issue the static A 192.168.1.43 255.255.255.0 192.168.1.1 command. The static command
configures a static IP address for a port on the Cisco TelePresence multipoint control unit (MCU) 5300. The
syntax of the static A command is static A ip-address subnet-mask [default-gateway].
The Cisco MCU 5300 has two Ethernet interfaces: Port A and Port B. To configure Port B with a static IP
address, you should issue the static B ip-address subnet-mask [default-gateway] command.
You can also configure a static IP address for either port by using the web interface. To do so, navigate to
Network > Port A or Network > Port B, set the IP configuration option to Manual, and configure the IP address,
Subnet mask, and Default gateway fields.
You should not issue the following command set:
interface A
ip address 192.168.1.43 255.255.255.0
ip default-gateway 192.168.1.1
This command set is similar to the IP address configuration of a Cisco router or switch. However, these
commands are not valid on a Cisco MCU 5300.
You should not issue the ip address 192.168.1.43 255.255.255.0 192.168.1.1command. The ip address
command is not valid on a Cisco MCU 5300.
You should not issue the following command set:
xConfiguration Network 1 IPv4 Address: “192.168.1.43”
xConfiguration Network 1 IPv4 Subnet-Mask: “255.255.255.0”
xConfiguration Network 1 IPv4 Gateway: “192.168.1.1”
You would issue these commands to configure a static IP address on a Cisco TelePresence System (CTS)
Codec, such as the C40 or C60.
You should not issue the set network ip static 192.168.1.43 255.255.255.0 192.168.1.1 command. The set
network ip static command is used to configure a static IP address on a CTS 1000. The syntax of the set
network ip static command is set network ip static ip-address subnet-mask default-gateway [dns-address1]
[dns-address2] [domain]. After you configure the static IP address, the CTS 1000 will automatically restart.Cisco: Cisco TelePresence MCU 5300 Series, Installation Guide: Task 5: (Optional) Assign an IP address to
the MCU 53×0 (PDF)
Hello, 2018 New Added Cisco 210-065 Exam Questions Free Released Today!
QUESTION 334
An engineer is connecting a VISCA cable. What is the purpose of this cable?
A. to connect camera to codec
B. to connect camera to monitor
C. to connect camera to touch panel
D. to connect camera to network
Answer: A
QUESTION 335
An engineer encounters video quality issues with an endpoint.
To capture ongoing call statistics from the CLI, which command should the engineer use?
A. xStatus Call Feature Display
B. xStatus OutgoingVideoChannel Netstat 1
C. xStatus Diagnostics
D. xCommand Diagnose
Answer: C
QUESTION 336
An engineer must ensure that a user can create content playlists for Digital Signs and Show and Share. Which Cisco Digital Media Suite component allows playlists to be created?
A. Cisco DMD
B. Cisco DMM
C. Cisco TMS
D. Cisco MXE
Answer: B
QUESTION 337
Which two tools can be used to extract traces from a Cisco Unified Communications Manager server? (Choose two.)
A. RTMT
B. TraceRT
C. Wireshark
D. CLI
E. Syslog
Answer: AD
QUESTION 338
A manager requires multiparty video meetings with presentation capability. Which endpoint meets the requirement assuming there is no centralized bridge?
A. Cisco SX20
B. Cisco DX650
C. Cisco 7800
D. Cisco Jabber
Answer: D
QUESTION 339
An administrator is troubleshooting an endpoint whose SIP Registration Status shows “Failed: 403 Forbidden” and must obtain information about the cause of the failure. To which two menu locations must an engineer navigate? (Choose two.)
A. Endpoint > Log Files > messages.log
B. Endpoint > Diagnostics > Log Files > all.log
C. VCS > Maintenance > Diagnostics > Incident Reporting > View
D. VCS > Status > logs > Configuration Log
E. VCS > Status > logs > Event Log
Answer: DE
QUESTION 340
Which type of lighting is recommended for Cisco TelePresence immersive solutions?
A. point
B. reflective
C. direct
D. indirect
Answer: A
QUESTION 341
A Cisco EX60 is connected to the network, but users cannot make calls and the device is
unregistered. The voice engineer configured the device on Cisco Unified Communications
Manager. Which two options are causes of this problem? (Choose two.)
A. SIP URI is not configured correctly.
B. H.323 parameters are not configured correctly.
C. IP address is in a different subnet.
D. No user is associated to a device.
E. SIP proxy is not configured correctly.
Answer: DE
QUESTION 342
Which desktop endpoint support 802.3af PoE?
A. DX70
B. DX80
C. DX90
D. DX650
Answer: D
QUESTION 343
An engineer is backing up a VCS configuration. Which two methods can be used? (Choose two.)
A. FTP
B. SFTP
C. SSH
D. web administration
E. local
Answer: BC
QUESTION 344
An engineer sees a video camera icon on the Cisco IP phone screen status line. Which meaning of this icon is true?
A. The Cisco VT camera is connected to the PC, and the PC is connected to the Cisco IP phone.
B. The Cisco IP phone has web access.
C. The Cisco IP phone is receiving a video call.
D. The Cisco IP phone is configured with video capabilities.
Answer: D
QUESTION 345
A company just acquired a Cisco MCU 5300 for multi videoconferencing. The networking engineer must create a conference. To which tab does the engineer go to create a conference?
A. Endpoints
B. Conferences
C. Network
D. Settings
Answer: B
QUESTION 346
Which option is the Cisco recommended minimum viewing distance for a 52″ monitor installed in a video conferencing room?
A. 1.5 m
B. 3.0 m
C. 2.5 m
D. 2.0 m
Answer: A
0
1
2m
0
0
Besides,If you want to read more new 2018 210-065 Real Exam Questions, you can check here: https://www.braindump2go.com/210-065.html (333Q&As PDF and VCE Dumps)
0
0