Which change can correct inband access to the WLC?
A.
change the switch FastEthernetO/1 duplex setting
B.
change the switch FastEthernetO/1 speed setting
C.
enable the switch FastEthernetO/1 spanning-tree port-fast trunk
D.
change the switch FastEthernetO/1 trunk encapsulation
E.
change the WLC management interface to use DHCP
F.
change the WLC management interface VLAN
G.
change the WLC configuration of NTP
H.
browse to WLC via http://10.10.10.10
Explanation:
All of the other ports in the network are using the default VLAN (VLAN 1) but port 0/1, which
connects to the WLC, is configured as a trunk, so VLAN 1 is not operationsl.
