You must accomplish the following tasks:
CORRECT TEXT
VTP Configuration LAB.
A new switch is being added to the River Campus LAN. You will work to complete this process by
first configuring the building_210 switch with an IP address and default gateway. For the switch
host address, you should use the last available IP address on the management subnet. In
addition, the switch needs to be configured to be in the same VTP domain as the building_100
switch and also needs to be configured as a VTP client. Assume that the IP configuration and VTP
configuration on building_100 are complete and correct.
The configuration of the router is not accessible for this exercise. You must accomplish the
following tasks:
Determine and configure the IP host address of the new switch.
Determine and configure the default gateway of the new switch.
Determine and configure the correct VTP domain name for the new switch.
Configure the new switch as a VTP client.
Drag each feature of the left to the appropriate routing protocol on the right.
DRAG DROP
Drag each feature of the left to the appropriate routing protocol on the right.
Drag the option on the left that best describes the unique advantage and disadvantage of each WAN link type
DRAG DROP
Drag the option on the left that best describes the unique advantage and disadvantage of each WAN link type to the correct box on the right.
A network associate is configuring a router for the weaver company to provide internet access.
CORRECT TEXT
A network associate is configuring a router for the weaver company to provide internet access.
The ISP has provided the company six public IP addresses of 198.18.184.105 198.18.184.110.
The company has 14 hosts that need to access the internet simultaneously. The hosts in the
company LAN have been assigned private space addresses in the range of 192.168.100.17 –
192.168.100.30.
The following have already been configured on the router
– The basic router configuration
– The appropriate interfaces have been configured for NAT inside and NAT outside
– The appropriate static routes have also been configured (since the company will be a stub
network, no routing protocol will be required.)
– All passwords have been temporarily set to “cisco”
Drag each description on the left to the appropriate term on the right.
DRAG DROP
Drag each description on the left to the appropriate term on the right. Not all descriptions are used.
Drag each category on the left to its corresponding router output line on the right.
DRAG DROP
Drag each category on the left to its corresponding router output line on the right.
CORRECT TEXT
CORRECT TEXT
Drag the options on the left under the type of switch port that they describe on the right.
DRAG DROP
Drag the options on the left under the type of switch port that they describe on the right.
Drag the Frame Relay acronym on the left to match its definition on the right.
DRAG DROP
Drag the Frame Relay acronym on the left to match its definition on the right. (Not all acronyms
are used.)
Drag each destination IP address on the left to its correct next hop address on the right.
DRAG DROP
Drag each destination IP address on the left to its correct next hop address on the right.
