Which type of remote access did the engineer enable?
A user is having issues accessing file shares on a network. The network engineer advises the user
to open a web browser, input a prescribed IP address, and follow the instructions. After doing this,
the user is able to access company shares. Which type of remote access did the engineer enable?
Which Cisco IOS VPN technology leverages IPsec, mGRE, dynamic routing protocol, NHRP, and Cisco Express Forwar
Which Cisco IOS VPN technology leverages IPsec, mGRE, dynamic routing protocol, NHRP, and
Cisco Express Forwarding?
Which traffic does the following configuration allow?
Which traffic does the following configuration allow?
ipv6 access-list cisco
permit ipv6 host 2001:DB8:0:4::32 any eq ssh
line vty 0 4
ipv6 access-class cisco in
which method can you use in combination with the “debug ip packet” command to limit the amount of output d
For troubleshooting purposes, which method can you use in combination with the “debug ip
packet” command to limit the amount of output data?
What is the reason for this?
Refer to the following access list.
access-list 100 permit ip any any log
After applying the access list on a Cisco router, the network engineer notices that the router CPU
utilization has risen to 99 percent. What is the reason for this?
Which address is used by the Unicast Reverse Path Forwarding protocol to validate a packet against the routing
Which address is used by the Unicast Reverse Path Forwarding protocol to validate a packet
against the routing table?
What are the three modes of Unicast Reverse Path Forwarding?
What are the three modes of Unicast Reverse Path Forwarding?
What does the following access list, which is applied on the external interface FastEthernet 1/0 of the perime
What does the following access list, which is applied on the external interface FastEthernet 1/0 of
the perimeter router, accomplish?
router(config)#access-list 101 deny ip 10.0.0.0 0.255.255.255 any log
router (config)#access-list 101 deny ip 192.168.0.0 0.0.255.255 any log
router (config)#access-list 101 deny ip 172.16.0.0 0.15.255.255 any log
router (config)#access-list 101 permit ip any any
router (config)#interface fastEthernet 1/0
router (config-if)#ip access-group 101 in
Which statement is true?
Refer to the following command:
router(config)# ip http secure-port 4433
Which statement is true?
Which command should be applied to the configuration to allow this?
A network engineer is configuring a routed interface to forward broadcasts of UDP 69, 53, and 49
to 172.20.14.225. Which command should be applied to the configuration to allow this?