SIMULATION
Network Topology Exhibit

Certkiller .com is a stock broker service that is using EIGRP AS 1 as the IGP in its network. Certkiller .com has decided to establish connectivity between the New York site and the Los Angeles site. NiceNet, a service provider, has been selected by Certkiller .com to provide the connectivity between the two sites. For this implementation NiceNet is using a MPLS VPN solution. NiceNet has already established MPLS connectivity between all of its PE routers. MPBGP connectivity has also been established on all PE routers. Certkiller .com has successfully completed all necessary tasks on the CE routers, and NiceNet has successfully completed all necessary MPLS VPN configuration tasks on PE12. Your task is to successfully complete the implementation of the VPN connection by configuring the MPLS VPN on PE11 using the following information:
Privileged mode password: Certkiller
EIGRP is to be used as the PE – CE protocol for the VPN MPBGP is being used to propagate VPN routing information between PE routers. The interface supporting the Certkiller .com is Serial 0/0.101 and will have an IP address of 150.1.119.18 255.255.255.240
The following has been assigned to Certkiller .com’s VPN:
The VRF_name is Certkiller _22
The RD is 22:10.
The route target for import is 21:10.
The route target for export is 21:10.
Configure EIGRP between CE11A and PE11 using AS number 10. Redistribute from BGP to EIGRP AS 10 using a metric string of 10000 100 255 1 1500.
Redistribute from EIGRP AS 10 to BGP using metric string of 1. VPN is operational when you see the routes for both the local (10.1.11.0) and the remote (10.1.12.0) sites in the VRF routing table.
Click on the host computer to start the simulation.

Refer to the graphic. At router B, complete the LFIB for a label of 25.

DRAG DROP
Match the drawbacks on the left to the appropriate MPLS Internet access methods on the right by dragging and dropping the drawbacks to the proper access method. Drawbacks that are not appropriate to either method should be placed in the trash.
Dragging and dropping the drawbacks to the proper access method?

DRAG DROP
Drag the number of bit(s) on the left to the field of the MPLS header that uses them on the right?

DRAG DROP
Match the benefits on the left to the appropriate Internet access method on the right by dragging and dropping each benefit to the proper access method. Benefits that are not appropriate to either method should remain in the left column.

Network Topology Exhibit

AS-Path prepending is used AS1 in order to influence the return traffic path from AS 5 to AS 1 through the higher speed via AS 2. ____________ needs to be configured for AS-Path prepending and a minimum of _____________ of the AS number should be prepended.

SIMULATION
Network Topology Exhibit

You are a CCNA, CCNP and CCSP certified network technician at Certkiller .com. Indigo IT company is a client of Certkiller .com. Indigo IT company is a stock broker service that is using EIGRP AS 1 as the IGP in its network. Furthermore Indigo IT company has decided to establish connectivity between the two sites. For this Implementation Certkiller .com is using a MPLS VPN solution. Certkiller .com has already established MPLS connectivity between all of its PE routers. MPBGP connectivity has also been established on all Certkiller routers. Indigot IT company has successfully completed all necessary tasks on the CE routers, and Certkiller .com has successfully completed all necessary MPLS VPN configuration tasks on Certkiller 12. Your task is to successfully complete the implementation of the VPN connection by configuring the MPLS VPN on Certkiller 11 using the following information:
Privileged mode password: Certkiller
EIGRP is to be used the Certkiller -CE protocol for the VPN. MPBGP is being used to propagate VPN routing information between the Certkiller routers.
The interface supporting the Indigo Company is Serial0/0 and will have an IP address of 150.1.244.18 255.255.255.240.
The following has been assigned to Indigo’s VPN:
The VRP name is Customer_6
The RD is 6:10
The route target for import is 14:10.
The route target for export is 14:10.
Configure EIGRP between CE11A and Certkiller 11 using AS number 10. Redistribute from BGP to EIGRP AS 10 using metric string of 10000 100 255 1 1500.
Redistribute from EIGRP AS 10 to BGP using a metric of 1. VPN is operational when you can see routes for both the local (10.1.11.10) and the remote (10.1.12.0) sites in the VRF routing table.
Start the simulator by clicking on the host computer?

DRAG DROP
Exhibit:

CE1A and CE2A belong to the Certkiller _A VPN. Select the correct commands for the PE1 router to establish static routing from PE1 to the CE1A 192.168.1.0/24 network by selecting them below. Some of the commands must be entered in the correct order. Also enable propagation of the static route intp MP-iBGP. Assume the MP-iBGP session between PE1 and PE2 have been configured already.

DRAG DROP
Identify the routing protocols on the left that are VRF aware by dragging and dropping them into the proper VRF category on the right.

DRAG DROP