You have upgraded your Cisco Nexus 7009 Switches and converted the default VDC to an
admin VDC. You notice that all of the ACLs are still present on the admin VDC after the
conversion. What should you do?

A customer reports that a 10-Gb interface between a Cisco Nexus 7009 Switch and a Cisco
Nexus 5548UP Switch is not passing traffic. The Nexus 7009 interface indicates up/up. The
Nexus 5548UP interface indicates up/down. Which feature should you enable to help isolate
the root cause?

A customer reports that it cannot establish a vPC peer link between two Cisco Nexus
5548UP Switches. The interfaces on both switches are configured and cabled correctly. The
interface status is up/down on switch 1 and up/up on switch 2. Which three steps are taken
to isolate the root cause? (Choose three.)

In Cisco NX-OS releases prior to 5.2, how should the copp-system-p-policy policy be
modified to change how the supervisor module is protected from DoS attacks?

You receive a priority 1 trouble ticket that there is OSPF route instability in the data center
core Cisco Nexus 7018 Switches. Which command is useful to help validate a theory that
hello packets are being throttled?

You are no longer seeing updates to the device-aliases database on your Cisco Nexus
5596UP Switch. Which command is useful to determine if the scope of Cisco Fabric
Services application distribution was being administratively limited?

Which command on a Cisco Nexus 5000 Series Switch will show the interface information
for port 10 on the connected FEX 100?

There is an ARP storm in VDC 1. Some users on VDC 2 notice that ARP is not resolving for
their gateway on the Cisco Nexus core. What is the cause?

You have enabled configuration synchronization between two Cisco Nexus 5548UP
Switches. You create a port channel on switch 1 and determine that it was not synchronized
with its peer. The peer switch can be pinged on the management VRF. When you check
your peer status, you receive a “peer not reachable” message in the command output. What
is the explanation for this?

Your customer has a dual Cisco Nexus 7010 Switches in its data center. Customer’s
representatives want to know how to determine if Cisco IOS ISSU is possible on the
switches as they are upgrading to version 6.0.4. Which command is useful to determine if
the upgrade will be non-disruptive?