Scenario
Refer to the topology. Your company has decided to connect the main office with three other
remote branch offices using point-to-point serial links.
You are required to troubleshoot and resolve OSPF neighbor adjacency issues between the
main office and the routers located in the remote branch offices.

R1 does not form an OSPF neighbor adjacency with R2. Which option would fix the issue?

Scenario
Refer to the topology. Your company has decided to connect the main office with three other
remote branch offices using point-to-point serial links.
You are required to troubleshoot and resolve OSPF neighbor adjacency issues between the
main office and the routers located in the remote branch offices.

An OSPF neighbor adjacency is not formed between R3 in the main office and R6 in the
Branch3 office. What is causing the problem?

Scenario
Refer to the topology. Your company has connected the routers R1. R2. and R3 with serial
links. R2 and R3 are connected to the switches SW1 and SW2, respectively. SW1 and SW2
are also connected to the routers R4 and R5.
The EIGRP routing protocol is configured.
You are required to troubleshoot and resolve the EIGRP issues between the various routers.
Use the appropriate show commands to troubleshoot the issues.

The loopback interfaces on R4 with the IP addresses of 10.4.4.4 /32, 10.4.4.5/32. and
10.4.4.6/32 are not appearing in the routing table of R5 Why are the interfaces missing?

Scenario
Refer to the topology. Your company has connected the routers R1. R2. and R3 with serial
links. R2 and R3 are connected to the switches SW1 and SW2, respectively. SW1 and SW2
are also connected to the routers R4 and R5.
The EIGRP routing protocol is configured.
You are required to troubleshoot and resolve the EIGRP issues between the various routers.
Use the appropriate show commands to troubleshoot the issues.

Which path does traffic take from R1 to R5?

Scenario
Refer to the topology. Your company has connected the routers R1. R2. and R3 with serial
links. R2 and R3 are connected to the switches SW1 and SW2, respectively. SW1 and SW2
are also connected to the routers R4 and R5.
The EIGRP routing protocol is configured.
You are required to troubleshoot and resolve the EIGRP issues between the various routers.
Use the appropriate show commands to troubleshoot the issues.

Router R6 does not form an EIGRP neighbor relationship correctly with router R1. What is
the cause for this misconfiguration?

Scenario
Refer to the topology. Your company has connected the routers R1. R2. and R3 with serial
links. R2 and R3 are connected to the switches SW1 and SW2, respectively. SW1 and SW2
are also connected to the routers R4 and R5.
The EIGRP routing protocol is configured.
You are required to troubleshoot and resolve the EIGRP issues between the various routers.
Use the appropriate show commands to troubleshoot the issues.

Why are the pings failing?