which address will the OSPF process select as the router ID?
R1 is configured with the default configuration of OSPF.
From the following list of IP addresses configured on R1, which address will the OSPF process
select as the router ID?
what password should be configured on the DeepSouth router in the branch office to allow a connection to be es
If required, what password should be configured on the DeepSouth router in the branch office to
allow a connection to be established with the MidEast router?
What would be the destination Layer 2 address in the frame header for a frame that is being forwarded by Dubai
What would be the destination Layer 2 address in the frame header for a frame that is being
forwarded by Dubai to the host address of 172.30.4.4?
Which connection uses the default encapsulation for serial interfaces on Cisco routers?
Which connection uses the default encapsulation for serial interfaces on Cisco routers?
Which command should be used to create this map?
A static map to the S-AMER location is required. Which command should be used to create this
map?
Why are the interfaces missing?
Scenario
Refer to the topology. Your company has connected the routers R1. R2. and R3 with serial links.
R2 and R3 are connected to the switches SW1 and SW2, respectively. SW1 and SW2 are also
connected to the routers R4 and R5.
The EIGRP routing protocol is configured.
You are required to troubleshoot and resolve the EIGRP issues between the various routers.
Use the appropriate show commands to troubleshoot the issues.
The loopback interfaces on R4 with the IP addresses of 10.4.4.4 /32, 10.4.4.5/32. and 10.4.4.6/32
are not appearing in the routing table of R5 Why are the interfaces missing?
Which path does traffic take from R1 to R5?
Scenario
Refer to the topology. Your company has connected the routers R1. R2. and R3 with serial links.
R2 and R3 are connected to the switches SW1 and SW2, respectively. SW1 and SW2 are also
connected to the routers R4 and R5.
The EIGRP routing protocol is configured.
You are required to troubleshoot and resolve the EIGRP issues between the various routers.
Use the appropriate show commands to troubleshoot the issues.
Which path does traffic take from R1 to R5?
What is the cause for this misconfiguration?
Scenario
Refer to the topology. Your company has connected the routers R1. R2. and R3 with serial links.
R2 and R3 are connected to the switches SW1 and SW2, respectively. SW1 and SW2 are also
connected to the routers R4 and R5.
The EIGRP routing protocol is configured.
You are required to troubleshoot and resolve the EIGRP issues between the various routers.
Use the appropriate show commands to troubleshoot the issues.
Router R6 does not form an EIGRP neighbor relationship correctly with router R1. What is the
cause for this misconfiguration?
Why are the pings failing?
Scenario
Refer to the topology. Your company has connected the routers R1. R2. and R3 with serial links.
R2 and R3 are connected to the switches SW1 and SW2, respectively. SW1 and SW2 are also
connected to the routers R4 and R5.
The EIGRP routing protocol is configured.
You are required to troubleshoot and resolve the EIGRP issues between the various routers.
Use the appropriate show commands to troubleshoot the issues.
Study the following output taken on R1:
R1# Ping 10.5.5.55 source 10.1.1.1
Type escape sequence to abort.
Sending 5.100-byte ICMP Echos to 10.5.5.55, timeout is 2 seconds:
Packet sent with a source address of 10.1.1.1
Why are the pings failing?
IP information
CORRECT TEXT
Attention:
In practical examinations, please note the following, the actual information will prevail.
1. Name of the router is xxx
2. Enable secret password is xxx
3. Password In access user EXEC mode using the console is xxx
4. The password to allow telnet access to the router is xxx
5. IP information