In an infrastructure based on a wireless advanced feature set using lightweight access points, by which method is a rogue contained?

This item consists of one or more multiple choice type questions that you must answer. To answer these questions, you need to use a GUI tool that becomes fully accessible by the use of the labs you see below these directions. The tabs have up and down arrows to signal the direction that the tabbed window may be dragged lo expose or hide the GUI tool. When you are done using the GUI tool, you may drag the tab down to continue answering questions. To advance to the next question in the series, click on the numbered button to the left of each question. Make sure that you have answered all the questions before continuing to the next item.

Which authentication method is used by the test” VPN group?

This item consists of one or more multiple choice type questions that you must answer. To answer these questions, you need to use a GUI tool that becomes fully accessible by the use of the labs you see below these directions. The tabs have up and down arrows to signal the direction that the tabbed window may be dragged lo expose or hide the GUI tool. When you are done using the GUI tool, you may drag the tab down to continue answering questions. To advance to the next question in the series, click on the numbered button to the left of each question. Make sure that you have answered all the questions before continuing to the next item.

How many active VPN clients are currently connected to the 1841 ISR router?

You connect via Telnet to a Cisco access point and enter the command show dot11 link test.
Which output might you obtain?

A customer in Europe needs to establish an 11-Mbps wireless bridge link between two office buildings that are approximately 1.3 km apart. The wireless link will pass through a public park, which contains a lake that is surrounded by trees. You run the range calculation and determine that the Cisco Aironet 1300 Series Outdoor Access Point/Bridge should work. You install the link using 10.5-dB yagis with 75 feet of standard Cisco cabling and both radios set at 20 mW. The wireless bridges are not able to establish or maintain a link.

What is needed to successfully complete this link?

You have configured and applied a Cisco IOS Firewall access rule to the inbound, untrusted interface. You suspect that the rule may be blocking necessary traffic onto the network. What must you do to delete that rule when using Cisco Router and Security Device Manager?

Which command assigns a cost value of “17” to a switch port?

A user is unable to connect to the Cisco Router and Security Device Manager via HTTPS. Which two of these might have caused this problem? (Choose two.)

A North American customer is using 2.4-GHz radios in a point-to-point configuration. The radio power level is 17 dBm and is transmitting at 11 Mbps. The customer is using 21.5-dBi dish antennas and 50 feet of cabling, with a loss of 8.4 dB per 100 feet. The customer increased the distance between the transmitter stations and began experiencing link problems.

Without using a professional installer, which step should the customer take to fix the situation?

When using Cisco Router and Security Device Manager to configure AAA login authentication policies, which four methods are available? (Choose four.)