What is the best method?
You are designing a wireless LAN with the following components:
– High-density indoor access point deployment
– 2.4-GHz and 5-GHz radios
– 802.11a, 802.11g, and 802.11n mode wireless LAN clients
Site survey results show negligible foreign WiFi and non-WiFi interference. What is the best method to
decrease duty cycle (radio frequency utilization) and increase overall wireless LAN client performance for this
design?
A. Disable all data rates below 12 Mb/s on all access points.
B. Decrease radio transmit power on all access points that report a high duty cycle.
C. Increase radio transmit power on all access points that report a high duty cycle.
D. Disable all data rates above 12 Mb/s on all access points.
E. Increase radio transmit power on all access points.
Which feature can be used to simplify the network design?
A company wants to connect two data center sites using a hub-and-spoke design with 2000 remote sites. One
design consideration is the requirement to transfer MPLS packets over the public Internet. In addition, one
router at each site should be used, and the MPLS packets must be encapsulated inside IP packets because
the public Internet cannot transfer native MPLS packets. Which feature can be used to simplify the network
design?
A. GET VPN can be used to encrypt the MPLS packets with IPsec.
B. DMVPN can be used to build up GRE tunnels dynamically with MPLS encapsulation inside.
C. L2TPv3 can be used to encapsulate the MPLS packets.
D. Site-to-site IPsec without GRE can be used to encapsulate the MPLS packets.
E. PPPoE can be used to encapsulate the MPLS packets.
Which of these is a benefit of an integrated security management system?
Which of these is a benefit of an integrated security management system?
Which service component within the prepare phase recommends the appropriate technology strategy to address a b
Which service component within the prepare phase recommends the appropriate technology
strategy to address a business requirement of the customer?
What are two important approaches to communicate when identifying a customer’s security risks?
What are two important approaches to communicate when identifying a customer’s security risks?
(Choose two.)
Which of the following best describe the customer benefit of creating a systems acceptance test plan in the de
Which of the following best describe the customer benefit of creating a systems acceptance test
plan in the design phase?
how many VTP domains?
A Cisco Catalyst switch can belong to how many VTP domains?
which three security services into one device?
The Cisco ASA Security Appliance can offer the benefit of integrating which three security services
into one device? (Choose three.)
Which Cisco Aironet product is the most applicable solution?
A customer has deployed a wireless core feature set using autonomous access points and now
wants to include a satellite building 4,500 feet away from the main campus. The customer also
wants to provide wireless access to a courtyard for wireless clients in close proximity to the
antenna mounting position. Which Cisco Aironet product is the most applicable solution?
What is one benefit of the Cisco anti-X defense strategy?
What is one benefit of the Cisco anti-X defense strategy?