How would you configure a rule in a Security Policy to allow SIP traffic from end point Net_Ato end point Net_
How would you configure a rule in a Security Policy to allow SIP traffic from end point Net_Ato end
point Net_B, through an NGX Security Gateway?
Which service type does NOT invoke a Security Server?
Which service type does NOT invoke a Security Server?
how are packets being handled by cluster members?
When Load Sharing Multicast mode is defined in a ClusterXL cluster object, how are packets
being handled by cluster members?
How do you request a new license for this VPN-1 NGX upgrade?
Your current VPN-1 NG with Application Intelligence (Al) R55 stanD. alone VPN-1 Pro Gateway
and SmartCenter Server run on SecurePlatform. You plan to implement VPN-1 NGX in a
distributed environment, where the existing machine will be the SmartCenter Server, and a new
machine will be the VPN-1 Pro Gateway only. You need to migrate the NG with Al R55
SmartCenter Server configuration, including such items as Internal Certificate Authority files,
databases, and Security Policies.
How do you request a new license for this VPN-1 NGX upgrade?
What is a requirement for setting up Management High Availability?
What is a requirement for setting up Management High Availability?
What is the consequence of clearing the "Log VoIP Connection" box in Global Properties?
What is the consequence of clearing the “Log VoIP Connection” box in Global Properties?
Which of the following TCP port numbers is used to connect the VPN-1 Gateway to the Content Vector Protocol (C
Which of the following TCP port numbers is used to connect the VPN-1 Gateway to the Content
Vector Protocol (CVP) server?
Which operating system is NOT supported by VPN-1 SecureClient?
Which operating system is NOT supported by VPN-1 SecureClient?
The following configuration is for VPN-1 NGX:ls this configuration correct for Management High Availability (H
The following configuration is for VPN-1 NGX:ls this configuration correct for Management High
Availability (HA)?
What is the problem with this configuration?
You are preparing a lab for a ClusterXL environment, with the following topology:
Vip internal cluster IP = 172.16.10.1; Vip external cluster IP = 192.168.10.3
Cluster Member 1: four NICs, three enabled: qfeO: 192.168.10.1/24, qfel: 10.10.10.1/24, qfe2:
172.16.10.1/24
Cluster Member 2: five NICs, three enabled; hmeO: 192.168.10.2/24, ethi: 10.10.10.2/24, eth2:
172.16.10.2/24
Member Network tab on internal-cluster interface: is 10.10.10.0, 255.255.255.0
SmartCenter Pro Server: 172.16.10.3
External interfaces 192.168.10.1 and 192.168.10.2 connect to a Virtual Local Area Network
(VLAN) switch. The upstream router connects to the same VLAN switch. Internal interfaces
10.10.10.1 and 10.10.10.2 connect to a hub. There is no other machine in the 10.10.10.0 network.
172.19.10.0 is the synchronization network. What is the problem with this configuration?