PrepAway - Latest Free Exam Questions & Answers

Category: 156-315.71

Exam 156-315.71: Check Point Security Expert R71

What is the problem with this configuration?

You are preparing a lab for a ClusterXL environment, with the following topology:
Vip internal cluster IP = 172.16.10.1;
Vip external cluster IP = 192.168.10.3
Cluster Member 1: four NICs, three enabled: qfeO: 192.168.10.1/24, qfel: 10.10.10.1/24, qfe2: 172.16.10.1/24
Cluster Member 2: five NICs, three enabled; hmeO: 192.168.10.2/24, ethi: 10.10.10.2/24, eth2: 172.16.10.2/24
Member Network tab on internal-cluster interface: is 10.10.10.0, 255.255.255.0
SmartCenter Pro Server: 172.16.10.3
External interfaces 192.168.10.1 and 192.168.10.2 connect to a Virtual Local Area Network
(VLAN) switch. The upstream router connects to the same VLAN switch. Internal interfaces
10.10.10.1 and 10.10.10.2 connect to a hub. There is no other machine in the 10.10.10.0 network.
172.19.10.0 is the synchronization network.

What is the problem with this configuration?

What is the correct upgrade procedure?

You want to upgrade a cluster with two members to VPN-1 NGX. The SmartCenter Server and
both members are version VPN-1/Firewall-1 NG FP3, with the latest Hotfix. What is the correct
upgrade procedure?
1. Change the version, in the General Properties of the gateway-cluster object.
2. Upgrade the SmartCenter Server, and reboot after upgrade.
3. Run cpstop on one member, while leaving the other member running. Upgrade one member at
a time, and reboot after upgrade.
4. Reinstall the Security Policy.


Page 19 of 48« First...10...1718192021...3040...Last »