How can you prevent delay-sensitive applications, such as video and voice traffi
How can you prevent delay-sensitive applications, such as video and voice traffic, from being dropped due to long queues when using a Check Point QoS solution?
which member will become active?
The following is cphaprob state command output from a ClusterXL New mode High Availability member:When member 192.168.1.2 fails over and restarts, .exhibit which member will become active?
What is the problem with this configuration?
You are preparing a lab for a ClusterXL environment, with the following topology:
Vip internal cluster IP = 172.16.10.1; Vip external cluster IP = 192.168.10.3 Cluster Member 1: four NICs, three enabled: qfe0: 192.168.10.1/24, qfe1: 10.10.10.1/24, qfe2: 172.16.10.1/24 Cluster Member 2: five NICs, three enabled; hme0: 192.168.10.2/24, eth1: 10.10.10.2/24, eth2: 172.16.10.2/24 Member Network tab on internal-cluster interface: is 10.10.10.0, 255.255.255.0 SmartCenter Pro Server: 172.16.10.3
External interfaces 192.168.10.1 and 192.168.10.2 connect to a Virtual Local Area Network (VLAN) switch. The upstream router connects to the same VLAN switch. Internal interfaces 10.10.10.1 and
10.10.10.2 connect to a hub. There is no other machine in the 10.10.10.0 network. 172.19.10.0 is the
synchronization network. exhibit What is the problem with this configuration?
How do you request a new license for this VPN-1 NGX upgrade?
Your current VPN-1 NG with Application Intelligence (AI) R55 stand-alone VPN-1 Pro Gateway and SmartCenter Server run on SecurePlatform. You plan to implement VPN-1 NGX in a distributed environment, where the existing machine will be the SmartCenter Server, and a new machine will be the VPN-1 Pro Gateway only. You need to migrate the NG with AI R55 SmartCenter Server configuration, including such items as Internal Certificate Authority files, databases, and Security Policies.
How do you request a new license for this VPN-1 NGX upgrade?
How do you define the FTP Resource Properties > Match tab to prevent internal users…
The following rule contains an FTP resource object in the Service field:
Source: local_net
Destination: Any
Service: FTP-resource object
Action: Accept
How do you define the FTP Resource Properties > Match tab to prevent internal users from sending corporate files to external FTP servers, while allowing users to retrieve files?
What is a requirement for setting up Management High Availability?
What is a requirement for setting up Management High Availability?
When you add a resource service to a rule, which ONE of the following actions occur?
When you add a resource service to a rule, which ONE of the following actions occur?
From the following output of cphaprob state, which ClusterXL mode is this?
From the following output of cphaprob state, which ClusterXL mode is this?
Which type of service should a Security Administrator use in a Rule Base to control access to specific shared
Which type of service should a Security Administrator use in a Rule Base to control access to specific shared partitions on target machines?
how are packets being handled by cluster members?
When Load Sharing Multicast mode is defined in a ClusterXL cluster object, how are packets being handled by cluster members?