What is a precondition for using L2 MAC rewrite with WCCP?
A. The LAN where WCCP router and ProxySG are located should use IPv6
B. No forwarding should be defined for ProxySG
C. ProxySG and router should be in the same broadcast domain
3 Comments on “What is a precondition for using L2 MAC rewrite with WCCP?”
networkmanagers says:
I have the same idea. C
ikarinusersays:
Answer is C
“However, to use
L2 forwarding, the ProxySG and the routers in the service group must all be on the same L2 broadcast
domain (that is, there cannot be more than one hop between them). In addition, L2 forwarding is only
supported on hardware-based switching platforms, such as the Catalyst series.”
I have the same idea. C
Answer is C
“However, to use
L2 forwarding, the ProxySG and the routers in the service group must all be on the same L2 broadcast
domain (that is, there cannot be more than one hop between them). In addition, L2 forwarding is only
supported on hardware-based switching platforms, such as the Catalyst series.”
Reference:
https://bto.bluecoat.com/sites/default/files/tech_pubs/WCCP_Reference_Guide_%28SGOS_5.5_-_6.2%29.0.pdf; p. 1-8
I choose C