View the exhibits.
Exhibit 1
The frame has these characteristics:
VLANID = 3
802.1p = 3
DSCP=32
Source IP address = 10.1.1.5
Click here for Exhibit 2
The frame shown in Exhibit 1 arrives on an HP 5800 switch’s GigabitEthernet port 1/0/1. QoS
maps are at their default settings. Based on the configuration shown in Exhibit 2, to which queue is
the outbound packet assigned?
A.
2
B.
3
C.
4
D.
5
Explanation:
How this traffic gets marked?
– The policy is applied to the interface Gi 1/0/1 with inbound direction, which means that the traffic
that comes
into the port gets the policy applied.
– As the frame matches the ACL subnet, it will remark the value of DSCP to 40
– Looking at the default table parameters, the traffic gets into the queue 5
(The outbound packet in this case refers to the same packet being placed to go out of the
interface, after the values have been applied)