Refer to the exhibit.

A network administrator wants to create a routed topology that ensures redundant connections between User
Group 1 and User Group 2. Based on this information, how many broadcast domains should the administrator
create?

Refer to the exhibit.

All four switches run MSTP. Switch_A, Switch_B, and Switch_C are configured with this MSTP information:
– Config name = “Region 1”
– Revision number= 1
– Instance 1 = VLANs 10, 12
– Instance 2 = VLANs 11, 13
– IST instance = VLANs 1-9, 14-4094
Switch_D is configured with this MSTP information:
– Config name = “Region1”
– Revision number= 1
– Instance 1 = VLANs 10, 12
– Instance 2 = VLANs 11, 13, 14, 15
– IST instance = VLANs 1-9, 16-4094
Based on this information, what is the result of this MSTP configuration?

A network administrator configures OSPF in an HP ProVision based network. The administrator is concerned
that a rogue device might connect to an access layer switch and introduce OSPF routes to the company’srouting topology.
The access VLANs do not contain additional routers.
Which configuration should the administrator apply for these access VLANs to prevent them from forming an
adjacency with rogue devices?

A company requires switches to use Multiple Spanning Tree Protocol (MSTP) instead of Rapid Spanning Tree
Protocol (RSTP), so that the switches can forward traffic on more than one switch-to-switch link. How does the
administrator set up the solution to meet this requirement?

A network administrator adds a new VLAN in a campus network, VI.AN 120. The administrator needs to set up
a DHCP scope for this VLAN. The scope will include an IP address for DHCP clients and a default gateway
address. An HP Comware aggregation layer switch acts as a DHCP server for this VLANs at the access layer.
The administrator configures this on the Comware switch for the new DHCP scope:

Based on this configuration, what else must the administrator configure to make the pool available to DHCP
clients that send requests in VLAN 120?

Which HP Comware term defines the untagged VLAN on a trunk port that is commonly used for network
management traffic?

Where is priority information stored in an Ethernet frame?

Refer to the exhibit.

The switches in the exhibit are all HP ProVision switches that run Multiple Spanning Tree Protocol (MSTP).
The network administrator wants all of the switch-to-switch links shown in the exhibit to be available for
forwarding routed traffic. What should the administrator do to accomplish this?

Refer to the exhibit.

The physical interfaces for Comware-1 and Comware-2 switches in the exhibit are configured in routed mode
and OSPF. Both switches have the three subnets in their routing tables. The administrator wants to use DHCP
to assign addressing information to the users. Based on the exhibit, where should the administrator configure
DHCP relay?

A network administrator configures several HP Comware switches to be part of a single Intelligent Resilient
Framework (IRF) virtual device. What is correct about the domain and member IDs in this configuration?