A customer wants to replicate the same data on their HP 3PAR StoreServ storage arrays to two
separate campus locations. Which Remote Copy topology would allow the customer to achieve
this activity?

Refer to the Exhibit:
The customer wants to implement an HP StoreOnce solution for the environment shown.
You have been given the following information:
– Each branch office has approximately 100 GB of data.
– Philadelphia has approximately 2 TB data.
– Pittsburg has approximately 1 TB data.
– All backup data will be replicated back to the data center in Pittsburg.
– Costs should be kept to a minimum but allow for the possibility of adding three more sites.
When designing the solution, which factor needs to be considered?

A client asks you to demonstrate the capabilities of an HP 3PAR StoreServ 7000 Storage array.
Which tool should you use?

A small service provider customer is in the process of a merger and needs to purchase additional

IT infrastructure components to support the expansion of their customer base. The goal is to offer
same-day repair from any hardware failures and increased high availability from the servers to the
local array.
The new proposal provides the following Bill of Materials (BOM):
– HP StoreSure 2000 – 155 TB of Midline SAS SFF Drives – FC Controller Pair
– A pair of HP SN6000B 16Gb 48-port/48-port Active Fibre Channel switches
– HP P2000 Remote Snap Software
– HP SN1000 2 Port 16 Gb HBAs
– 24 Fibre Channel cables
– 10 HP ProLiant DL360 Gen8s
– vSphere Enterprise Plus and vCenter licenses from HP
– Call-to-repair 24×7 coverage with four-hour on-site response
The customer operating budget is constrained, and the price of the BOM is too high.
Which components do you propose to change to meet their budget goals without sacrificing their
critical to quality goals? (Select two.)

HP Secure Key Manager provides centralized encryption technologies for which tape libraries?

Which feature must the B-series switch support when connecting an HP Virtual Connect
FlexFabric module to a B-series switch?

A customer storage infrastructure consists of eight HP StoreVirtual 4000 nodes in a cluster,
connected to an HP 2910-24G al network environment.
Server virtualization is done using VMware vSphere 5.1 on six hosts across two sites.
Which drawbacks must the customer consider when upgrading the solution? (Select two.)

A customer plains to replace their storage array with an HP 3PAR StoreServ 10800 Storage
System. This array stores sensitive data and must be highly available. The solution must comply
with all legal requirements for securing sensitive data.
Which level of service you recommend for the new HP 3PAR StoreServ array?

Refer to the exhibit.
The customer wants to implement an HP StoreVirtual solution for the environment shown. The
storage requirements dictate that the solution must have four nodes per site. What needs to be
considered when designing the solution?

B-series switches with Access Gateway mode enabled provide connectivity to other switches that
support which feature?