Which storage networking protocol can be utilized?
You have a 150MB/s link between sites, which forms a 3PAR replication pair. Which storage
networking protocol can be utilized?
which components must be installed and configured to upgrade a P4000 solution from 1GbE to 10GbE?
In addition to the NIC, which components must be installed and configured to upgrade a P4000
solution from 1GbE to 10GbE? (Select two)
Which Data Protector configuration option will improve deduplication ratio?
Which Data Protector configuration option will improve deduplication ratio?
Which recommendation can be implemented to improve response times?
You are called in to performance tune a SAN environment The SANs were initially installed as
SAN islands and response times were acceptable. The SAN islands have now been consolidated.
Servers and storage are added to the SAN wherever free ports are available Response times are
now considered unacceptable.
Which recommendation can be implemented to improve response times?
What can you do to improve the performance?
You have a group of Windows hosts running SQL that are not using a Volume Manager and are
performing poorly. They are connected to a P900 using standard provisioned LUNs. What can you
do to improve the performance?
what should you do to achieve optimal deduplication?
When configuring D2D devices using one of the flexible emulation types, it is important to balance
the pool of devices carefully Accord.ng to best practices, what should you do to achieve optimal
deduplication? (Select two.)
what is the minimum achievable Recovery Point Objective?
When using 3PAR Remote Copy in asynchronous mode, what is the minimum achievable
Recovery Point Objective?
which parameters can be changed?
You are using Dynamic Optimization to tune a 3PAR virtual volume. In addition to radial placement
and drive type, which parameters can be changed? (Select Two)
Which replication protocol can fully utilize the pipe?
You have a 500MB/s link between sites that forms a 3PAR replication pair. Which replication
protocol can fully utilize the pipe?
What is most likely the cause?
All servers connected to your customer’s P4500 SAN are suddenly unable to write data to the
SAN. The servers can fulfill read request, but writes fails. What is most likely the cause?