Which solution should the architect recommend to achiev…
A customer’s database is slow to respond, and the customer meets response times to be dramatically
increased.
Which solution should the architect recommend to achieve this result?
What should the administrator do to separate traffic?
A system administrator is concerned about a high number of visitors connecting to a company’s network. In
addition to the production network traffic, the network infrastructure is used for the systems management traffic
to the company’s servers.
What should the administrator do to separate traffic?
Which array controller should the architect recommend f…
A customer is considering the DL380 Gen9 as the platform standard for its VLAN cluster. The configuration will
use 24 drives. Each 8-drive cage will contain 1 SSD and 7 SATA drives.
Which array controller should the architect recommend for this configuration?
Which methods can an administrator implement to provide…
Which methods can an administrator implement to provide higher security within a management network?
(Select two.)
How can the administrator meet this requirement?
Refer to the exhibit.
Router 4, which is an HP Comware router, redistributes Routing Information Protocol (RIP) routes into Open
Shortest Path First (OSPF) process 1. Router 4 has several dozen IP routes, and the network administrator
wants to minimize the number of external routes throughout the entire OSPF AS. How can the administrator
meet this requirement?
What happens to VRRP operations in VLAN 3?
Refer to the exhibits.
Exhibit 1
Exhibit 2
Exhibit 2 shows the Virtual Router Redundancy Protocol (VRRP) configuration and status for VLAN 3 on switch
1 during normal operation, when both Switch 1 and Switch 2 are up. Switch 1 then experiences a power failure.
After a few minutes, power is restored, and the switch comes back up.
What happens to VRRP operations in VLAN 3?
What can the network administrator do to meet this requ…
Refer to the exhibit.
A server connects to GigabitEthernet1/0/1 on an HP Comware switch. The server sends tagged traffic in
VLAN2. It has an application that sets the DiffServ Code Point (DSCP) for its traffic to 16 and the 802.1p value
to 2. The switch should use the DSCP to place the traffic in priority queue. The traffic belongs to the queue that
is one priority level higher than the queue for best effort traffic (traffic without a QoS value)
What can the network administrator do to meet this requirement?
Hot Area:
HOTSPOT
Match the characteristic to the routing protocol.
Hot Area:
Hot Area:
HOTSPOT
Refer to the exhibit.
Switch 3 runs Rapid Per-VLAN Spanning Tree Plus (RPVST+), which is enabled on VLANs 1-4. Select the
correct number for each of these parameters.
Hot Area:
How does the switch handle the traffic?
Refer to the exhibit.
This HP 10500 Switch Series is receiving an average of 1 Gbps of HTTP traffic from 10.1.4.0/24. The switch
starts to receive an additional 1 Gbps of HTTP traffic from 10.1.4.0/24. How does the switch handle the traffic?