HOTSPOT
For each customer requirement, specify how to configure the Use Controller for Authentication and
Use Controller for Access Control options in a VSC.
Answer: <a href=”//cdn.briefmenow.org/wp-content/uploads/hp2-z32/35.jpg”><img class=”aligncenter size-full” src=”//cdn.briefmenow.org/wp-content/uploads/hp2-z32/35.jpg” alt=”” /></a>
Explanation:
APs send authentication traffic to the controller but forward traffic from authenticated clients
directly onto the wired network -select use controller for access control
APs forward both authentication traffic and users traffic to the controller for handling – select use
controller for authentication
APs authenticate clients and forward users traffic directly onto the wired network – do not select
either option
Answer should be:
1- Select use controller for authentication
2- Select use controller for access control
3- do not select either option
explanation:
1- selecting authentication means only authentication requests will be forwarded to controller.
2- selecting access control means that authentication is also selected (access control can not be selected unless authentication is selected) which means all traffic will be forwarded to controller first
3- selecting none of the options means that the AP forwards traffic directly to the wired network.
Check MSM7XX configuration guide to confirm
0
0